+
  • 200+400M雷达.png

BD-GPR-S Dual-Frequency Radar (200+400 MHz)

It is suitable for applications in engineering surveys, municipal pipeline inspections, tunnel diagnostics, and other fields, enabling the detection or identification of metallic and non-metallic targets at specific subsurface depths, such as concealed pipe detection, pipeline mapping, void‑and‑loose‑soil detection, and the assessment of structural defects.


keyword


Classification


Product Detail


Product用途:

It is applicable to fields such as engineering surveys, municipal pipeline inspection, and tunnel diagnostics, used to detect or identify subsurface metallic or non-metallic targets at a specified depth, including concealed pipe detection, pipeline mapping, detection of voids and loose soil, and identification of structural defects. The specific categories are as follows:

◆Geotechnical Investigation: Used to identify subsurface anomalies within the project area, such as karst features, sinkholes, and fractured zones.

◆ Municipal utility pipelines: Used to determine the distribution of underground metallic and non-metallic pipelines during urban development.

◆ Roads and Bridges: Used for investigating unfavorable geological conditions during the site selection process for roads or bridges.

 

Product Features:

◆This product features an integrated host-and-antenna design, offering a compact size, lightweight construction, and low power consumption.

◆ Wireless connection between the host and the computer for convenient operation.

◆ Enables real-time data acquisition and display

◆The software features a clean interface, simple operation, and quick learning curve.

◆ Multi-band antennas available, with a wide range of applications.

◆The analysis software is easy to operate, and the results are interpreted accurately.

◆High detection accuracy and precise localization

◆ Built-in ultra-large-capacity battery for long-lasting performance

◆ Ergonomic structural design—simple, durable, and easy to operate—making it ideally suited for mobile field work environments.

 

Compliant with standards:

◆ “Code for Geophysical Prospecting in Hydropower and Water Conservancy Engineering DL/T 5010-2005”

◆ “Geophysical Exploration Code for Water Conservancy and Hydropower Engineering SL 326-2005”

◆ Code for Geophysical Prospecting in Power Engineering DL/T 5159-2012

◆ “Underwater Engineering Geophysical Exploration Code DB34/T 2209-2014”

◆ “Ground-Penetrating Radar for Highway Cross-Section Flaw Detection and Structural Layer Thickness Measurement, JT/T 940-2014”

◆ “Standard for Geophysical Exploration in Urban Engineering CJJ/T 7-2017”

◆ Technical Specification for Urban Underground Pipeline Detection CJJ 61-2017

◆ Technical Specification for Quality Inspection of Construction Projects Using Radar Method DGJ 32-TJ79-2009

◆ Technical Specification for Advanced Geological Forecasting in Railway Tunnels Q∕CR 9217-2015

◆ Technical Standard for Comprehensive Detection and Risk Assessment of Urban Underground Hazards, JGJT 437-2018

◆ “Code for Geophysical Exploration in Highway Engineering JTGT 3222—2020”

 

Configuration List:

BD-GPR-S (200 MHz + 400 MHz) Ground-Penetrating Radar

Antenna center frequency

200 MHz + 400 MHz

Measurement method

Point-by-point measurement, distance-triggered measurement, continuous measurement

Scan rate

350 lines/second

Display mode

Pseudo-color image, stacked waveform, or grayscale image

Analog-to-digital conversion

18bit

Operating temperature

-40℃~+70℃

Continuous working hours

≥8 hours

Operating voltage

10-15VDC

Total system power consumption

<16W

Protection rating

IP66

Signal-to-noise ratio

Better than 160 dB

Wireless data transmission distance

Greater than 50 m

Minimum sampling interval

10ps

Weight

Bare machine: 10.7 kg; Complete set: 21.8 kg

Maximum detection depth

8m

External dimensions

590mm×440mm×200mm

 

Case Study:

 

Data Image:

 

Message Consultation


Submit Now