PRODUCT
BD-GPR-S Dual-Frequency Radar (200+600 MHz)
It is suitable for applications in engineering surveys, municipal pipeline inspection, tunnel diagnostics, and other fields, enabling the detection or identification of metallic and non-metallic targets at specific subsurface depths, such as concealed pipe detection, pipeline mapping, detection of voids and loose soil, and identification of structural defects.
keyword
Classification
Product Detail
Product用途:
It is applicable to fields such as engineering surveys, municipal pipeline inspections, and tunnel diagnostics, and is used to detect or identify metallic or non-metallic targets at a specified depth underground, such as… Subsurface pipe detection, pipeline detection, void detection in loose or poorly compacted areas, and engineering defect detection. . The specific categories are as follows:
◆ Engineering Investigation: Used to identify subsurface anomalies within the project area, such as karst features, sinkholes, and fractured zones.
◆ Municipal utility pipelines: Used to determine the distribution of underground metallic and non-metallic pipelines during urban development.
◆ Roads and Bridges: Used for investigating unfavorable geological conditions during the site selection process for roads or bridges.
Product Features:
◆ This product features an integrated host-and-antenna design, offering a compact size, lightweight construction, and low power consumption.
◆ Wireless connection between the host and the computer for convenient operation.
◆ Enable real-time data acquisition and display
◆ The software features a clean interface, simple operation, and a quick learning curve.
◆ Multi-band antennas available, with a wide range of applications.
◆ The analysis software is easy to use, and the results are interpreted accurately.
◆ High detection accuracy and precise localization
◆ Built-in ultra-large-capacity battery for long-lasting performance
◆ Ergonomically designed, simple, durable, and easy to operate—perfect for mobile field work environments.
Compliant with standards:
◆ “Code for Geophysical Exploration in Hydropower and Water Conservancy Engineering DL/T 5010-2005”
◆ “Geophysical Exploration Code for Water Conservancy and Hydropower Engineering SL 326-2005”
◆ Code for Geophysical Prospecting in Power Engineering DL/T 5159-2012
◆ “Underwater Engineering Geophysical Exploration Code DB34/T 2209-2014”
◆ “Ground-Penetrating Radar for Highway Cross-Section Flaw Detection and Structural Layer Thickness Measurement JT/T 940-2014”
◆ “Standard for Geophysical Exploration in Urban Engineering CJJ/T 7-2017”
◆ Technical Specification for Urban Underground Pipeline Detection CJJ 61-2017
◆ Technical Specification for Quality Inspection of Construction Projects Using the Radar Method, DGJ 32-TJ79-2009
◆ Technical Specification for Advanced Geological Forecasting in Railway Tunnels Q∕CR 9217-2015
◆ Technical Standard for Comprehensive Detection and Risk Assessment of Urban Underground Hazards, JGJT 437-2018
◆ “Code for Geophysical Exploration in Highway Engineering JTGT 3222—2020”
Performance specifications:
BD-GPR-S (200 MHz + 600 MHz) Ground-Penetrating Radar
|
|||
Antenna center frequency
|
200 MHz + 600 MHz
|
Measurement method
|
Point-by-point measurement, distance-triggered measurement, continuous measurement
|
Scan rate
|
350 lines/second
|
Display mode
|
Pseudo-color image, stacked waveform, or grayscale image
|
Analog-to-digital conversion
|
18bit
|
Operating temperature
|
-40℃~+70℃
|
Continuous working hours
|
≥8 hours
|
Operating voltage
|
10-15VDC
|
Total system power consumption
|
<16W
|
Protection rating
|
IP66
|
Signal-to-noise ratio
|
Better than 160 dB
|
Wireless data transmission distance
|
Greater than 50 m
|
Minimum sampling interval
|
10ps
|
Weight
|
Bare machine: 9.6 kg Full set: 20.7 kg
|
Maximum detection depth
|
8m
|
External dimensions
|
590mm×440mm×160mm
|
Case Study:

Data Image:

Previous
Next
Previous
Next
Recommended products






